Ecocool F

ECOCOOL F is a fully synthetic; water based, multi-purpose grinding and machining fluid. This product contains no oil, phenol, sulphur, chlorine or nitrites. The concentrate is suitable for all types of wet grinding including cylindrical grinding, surface grinding, center less or integral grinding. ECOCOOL F is diluted with water at between 1 to 2% for use on grinding all varieties of steel alloys such as those used for saws and knives (including carbide tipped), aluminum alloys and cast iron. ECOCOOL F doubles as a coolant for light duty machining (cutting, drilling, turning, milling) of brass, aluminum and mild steel alloys when used at 5%.

ECOCOOL F provides wetting, cooling and flushing in one product. Since this product is synthetic, it produces a stable, clear solution with long service life and good visibility.

How to Use
ECOCOOL F is mixed with water for use. It may be used at concentrations ranging from 10:1 to 50:1. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add ECOCOOL F concentrate to water.

Advantages

• Possesses good wetting and cooling characteristics promoting freedom from wheel glazing
• Exceptionally long fluid life
• Low foaming characteristics
• Rapid swarf separation
• Does not emulsify mineral oil contaminants
• Excellent work piece visibility
• Good hard water stability
• Good corrosion resistance
• Sodium nitrite and phenol free
• Multiple applications by varying concentrations (1-2% for grinding and 5% for other machining operations)

Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) – 32°C (90°F). Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.