Ecocool 7081 C

ECOCOOL 7081 C is a general purpose, moderate duty semi-synthetic cutting and grinding fluid suitable for a wide variety of ferrous and non-ferrous metals.

ECOCOOL 7081 C contains extreme pressure (EP) additives and lubricity enhancers to provide fine surface finishes and extended tool life without the use of chlorinated paraffins. ECOCOOL 7081 C helps prevent burning, staining and cracking when grinding and provides excellent in-process rust protection.

How to Use
ECOCOOL 7081 C is mixed with water for use. It may be used at concentrations ranging from 10:1 to 20:1. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add ECOCOOL 7081 C concentrate to water. The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F). Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.

Advantages

• Suitable for both aluminum & ferrous materials
• Contains EP lubricity enhancers
• Good pH stability
• Fine surface finishes
• Extended tool life
• Provides in-process rust protection
• Triazine and chlorine free

How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.